PUMA RS-X review

With its hues ranging from straightforward duotone to multicoloured splashes, there is an RS-X for every individual. We believe that it's the right PUMA footgear for you if:

• футболка puma 8-10 лет retro silhouette
• you need a breathable mesh sneaker for summertime
• you prefer generously cushioned kicks for all-day wear

The only major problem with the PUMA RS-X is that it's heavy. Of course, it comes with a heavily cushioned and chunky platform but some people may be willing to give up a few millimetres in return for a lighter sneaker.

If you are okay with a slightly lower sole but notably lighter weight, check out retro silhouettes like the New Balance 530 and the Adidas Ozweego.

PUMA Future Rider Play On Womens Sneakers in Be Purple White Glacial Blue.

Even though the shoe's primary mesh material is covered by multiple overlays, they barely interfere with its ventilation capacity. Pumping smoke through the shoe's upper, we can see how easily it passes through the toebox and other parts.

On a 1-5 scale, where 5 is the most breathable, we can readily give the PUMA RS-X a 4.

In a quick transparency test below, you can see the most airy parts of the upper - the toebox and the quarter.

Using a microscope, we also took a closer look at the mesh itself. As you can see, it is quite porous, allowing lots of air in and out.

Baskets puma pratiquement jamais portées.

Adding a protective overlay around delicate mesh was a good idea to prolong the shoe's shelf life.

Equipped with a Dremel, we tested out how the toebox holds up against wear and tear. Applying a consistent speed (10K RPM) and force (3.2N), we were pleasantly surprised with the resistance of that synthetic overlay. It definitely saved the mesh from being completely torn apart.

This allows us to rate the toebox's durability with a decent score of 3 out of 5.

The shoe's interior collar lining is much more exposed in that regard. Made of soft textile, it wasn't able to resist the Dreme so well.

Having applied the tool for only 4 seconds at a moderate speed (5K RPM), the damage was tangible enough to lower its durability rating to 2/5.

Looks like we're dealing with a pretty sturdy outsole here on the PUMA RS-X.

Using our durometer to check the firmness of the rubber on the RS-X, we got a reading of 86.8 HC. This is harder than average and leads us to expect a little more from the outsole durability.

And this PUMA sneaker didn't disappoint. Surviving the long 22 seconds of Dremel drilling at a high speed of 10K RPM, the amount of outsole damage was smaller than average!

We measured the depth of the dent with the help of a tread gauge. At 0.8 mm, the RS-X makes it into the more durable range of trainers.

And if you still have any doubts, let us dispel them by saying that the RS-X has one of the thickest outsoles among trainers!

Using a calliper, we measured the rubber layer at 6.5 mm. It is thicker than in most low-top trainers. Considering its hardness too, this outsole can take a lot of beating up.

The PUMA RS-X is a hefty one, no doubt about that.

Putting it on our scale, we got 16 oz (455g) in a men's US size 9. This is more than 2 ounces heavier than trainers on average.

But we believe it is fair given how much cushioning and wear resistance the shoe offers in return.

Puma BMW MMS Street Bukser i sort!

Based on our calliper measurement, the heel stack (insole and outsole included) of the RS-X is a whopping 39.9 mm thick! It is nearly half an inch taller than average!

We can even say that this PUMA is on the verge of platform trainers.

As expected, the PUMA RS-X is pretty thick in the forefoot as well.

With our calliper showing 22.7 mm, it is notably taller than the average. Needless to say, we felt pretty high off the ground wearing this PUMA shoe.

If you enjoy the feeling of massive cushioning beneath your heel, the PUMA RS-X should feel right at home.

Given the difference in its stack heights, the RS-X elevates your heel as much as 17.2 mm above the toes. This is one of the highest drops we've ever seen in a sneaker.

The main benefit of this setup is that your heel receives notably more cushioning, while the ankle doesn't have to do much work. But this is a matter of personal preference, of course, as some people do like more natural-feeling kicks with a lower drop (i.e. Adidas Gazelle at 8.3 mm).

From the look of it, the PUMA RS-X appears to be very firm and rigid. Oh how delighted we were to find out that it's not true!

On foot, this sneaker actually felt quite bouncy! Which means there was enough softness to it to compress.

Indeed, our durometer showed that the shoe's foam comes in at 15.6 HA which is 100% softer than trainers on average!

PUMA decided to turn the cushioning volume to the max by inserting an 8-mm insole! Thicker than average, it creates an amazingly pampering underfoot experience.

It's not every day that we see orthotic elements in a stock insole! Bravo, PUMA!

If you are worried about feeling unstable wearing cinzento a high platform, don't be!

PUMA took care of this by adding enough torsional rigidity and width to the platform. Never once did we feel concerned about rolling our ankles in the RS-X.

Twisting the PUMA RS-X sideways wasn't so easy! On a 1-5 scale, where 5 is the stiffest, we would rate this sneaker as 4. That is stiffer than the average of casual trainers.

We really appreciated the way PUMA managed to 382106-01 soft cushioning with side-to-side stiffness in the RS-X.

Featuring a whole lot of overlays, we were surprised that the shoe's heel counter remained quite pliable.

With 5 being the stiffest, we rated the RS-X's heel counter stiffness as only 2. It is more flexible than average.

But we didn't feel like the ankle hold was negatively affected by that. Nor did we experience any heel slippage in this PUMA shoe.

Last but not least, the shoe's wide platform is a major contributing factor to its stability.

Even before measuring the RS-X, we could see that it was among the widest platforms we've ever got our hands on.

In the widest part of the forefoot, our calliper showed 116.1 mm which is significantly wider than average.

It gets even crazier in the heel!

With the widest part of the sole showing 94.7 mm, the RS-X is only second to the Adidas Ozweego (98.9 mm)!

Of course, we couldn't expect the PUMA RS-X to bend like an acrobat given how much is going on in its base.

Using a force gauge, we measured that it took 26.5N to bend this PUMA sneaker to a 90-degree angle. That is 40% more than it takes an average sneaker.

This PUMA sneaker features a variety of traction patterns on the outsole. We felt pretty secure in all urban conditions but wouldn't recommend getting this shoe into mud or slush. You most likely wouldn't want to anyway.

From our experience, the PUMA RS-X fits a medium-width foot perfectly.

Using a calliper, we measured the widest part of the toebox at 98.4 mm which sits right at the average of trainers.

There is no tapering in the toebox either.

Putting a calliper at the big toe mark, it returned 78.9 mm, slightly wider than average.

The tongue has no gussets on the sides but this never caused any shifting. We found it to be thick and wide enough to remain in place.

Actually, the tongue is pretty generously padded on this PUMA shoe. With our calliper showing 11.1 mm, it turns out to be almost twice as thick as the average.

There are two finger loops on the PUMA RS-X: one on the tongue and one on the heel counter. Both are very well integrated into the shoe's overall design and don't feel out of place at all.

We found them pretty handy for slipping into the sneaker as well as adjusting the tongue on the go.

The shoe's default insole is removable. But given its comfort and arch support, we don't even think there is a need for that!

None of the RS-X's elements are reflective in the dark.

The first model to carry the PUMA RS cushioning technology was the RS 100, which was released in 1986.

Following in the footsteps of the RS100 was the RS-Computer Chip. It was the first shoe to have a built-in computer chip at the heel that could gather the wearer’s running distance over a period of time. It, too, calculated the caloric cost of running (basically, today’s Fitbit).

In early 2018, PUMA revived the RS cushioning technology with the launch of the reawakened RS-0, along with the modernised versions of the PUMA S-100 and PUMA RS-350.

To continue paying homage to the revolutionary technology, PUMA dropped the RS-X series in subsequent 2018. It's a natural fit for PUMA’s Futro marketing campaign—a selection of future and retro trainers.