Converse converse skidgrip military green pack review

Converse Ctas Ox Cherry Blossom Pink Kids Sneake Converse Chuck 70 High if you want:

• a high-top sneaker that can be styled with nearly every outfit
• a go-to-pair that fits into any occasion, from a music concert to a wedding
• an affordable and very cost-effective sneaker for only £100
• a more reinforced version of the Chuck Taylor All Star (£70): thicker canvas, taller rubber sidewalls, etc.

Style-wise, we have zero gripes about the Chucky But when it comes to day-to-day comfort and support, we just cannot recommend this Converse kick for prolonged wear.

A better alternative would be the Converse Run Star Hike as long as you don't mind the platform. This high-top sneaker offers much better cushioning and support for daily walks.

Among other classic trainers, we found that the Air Jordan 1 Mid is a solid option for spending hours on your feet.

Choosing the Chuck 70 for summertime is not the best idea considering the shoe's solid canvas upper.

Filling its upper with smoke in our breathability test, we weren't surprised to see just a tiny streak of vapour. It primarily passed through the metal eyelets and the gaps in between the tongue and the upper.

Two ventilation holes on the inner side of the sneaker didn't help the airflow as much either.

Even when we investigated the canvas through our microscope, we didn't see any pores that could potentially help the ventilation.

On a 1-5 scale, where 1 is the least breathable, we gave the Chuck 70 a low score of 2. It is not a great option for temperatures above 70°F (21°C).

Let us not forget that the original Chuck All Star was intended for basketball. It explains the sneaker's reinforced design, especially in the toebox.

We used a Dremel with a sandpaper tip to check the wear resistance of the shoe's toe cap. After drilling it for 12 seconds at 5K RPM speed and 3.2N pressure, we found it to be very sturdy indeed!

Compared to the unprotected mesh uppers on some other trainers, this Converse boasts excellent durability.

On a 1-5 scale, where 5 stands for maximum durability, the Chuck 70 earned a solid 4.

Finally, a shoe which you can knock around and bump into things without worry!

Unfortunately, the same cannot be said about this kick's inner lining.

The textile inside the ankle collar got torn after a mere 4 seconds of drilling it with our Dremel. Compared to other trainers, the result is worse than the average.

We think that this will be the first part of the kick to show signs of wear. On a 1-5 durability scale, where 1 is the least durable, the Chuck's heel lining gets only 2.

On a lighter note, we are not worried about the outsole of this Converse sneaker at all!

The kick's rubber shows a durometer measurement of 82.9 HC which is close to the average. It indicates a good level of hardness which makes the outsole tougher to wear out.

Even in our highly demanding Dremel test, the Chuck 70 took all the abuse without showing significant wear.

With the speed set to 10K RPM, we applied the tool's sandpaper tip to the rubber for 22 seconds. We were pleased that the damage was just the same as the average - only 1.1 mm.

As a hoop shoe in its past reincarnation, the Chuck 70 features a very thick rubber layer underfoot. Measuring it with our calliper returned 7.4 mm which is 2 mm thicker than most kicks!

All things considered, we are not surprised that some wearers of the Converse Chuck 70 don't need to replace their old pair in less than a year! It is a truly durable sneaker.

Among the high-top trainers we've tested in our lab, the Chuck 70 is on the lighter side. It tips the scale at 17.0 oz (482g) in a men's US size 9.

The bulkiest part of the shoe is obviously its sole. That's why it may feel somewhat bottom-heavy at first.

With a moderate heel stack of 26.2 mm, the Converse Chuck 70 offers a very grounded underfoot experience.

Don't expect much impact protection for the heels as about two-thirds of the shoe's heel stack is made of hard rubber and firm foam.

This Converse sneaker also felt very close to the ground under the balls of our feet. Stepping on pebbles, bottle caps, and other urban debris certainly didn't go unnoticed.

Based on our calliper measurement, the shoe's forefoot stack is only 17.6 mm thick which backs up our personal experience.

The heel-to-toe difference inside the Chuck 70 comes in at a moderate 8.6 mm, a little lower than average.

But it's hard to notice unless you have worn dozens of trainers with different drops.

If we tell you that the Converse Chuck 70 is not a cdg sneaker, we are probably not breaking the news.

For the most part, this is due to the shoe's hard vulcanised outsole paired with a tall rubberized overlay.

But on top of that, the shoe's midsole layer (the blue one) is not very soft either. Pressing our durometer against it, we got a reading of 25.1 HA. It is not as hard as the average sneaker but still firmer than popular shoes like the Y-bar overlay below the collar and a Converse hit on the medial quarter and the New Balance 9060.

To make the walking experience pleasant enough, the Chuck 70 features an impressively thick and comfy OrthoLite insole.

It is a whopping 13.9 mm thick! Maybe it should be considered the shoe's midsole instead?

We found that the Converse Chuck 70 High feels stable but not supportive. Does that make sense? Let us explain.

The shoe's firm and nearly flat sole creates a stable platform that doesn't compress or collapse. Back in the day, this sensitive ground contact even made the kick popular for weightlifting, especially deadlifting!

But if we are talking about side-to-side stability or arch support for people with overpornation, we wouldn't recommend this kick. Unfortunately, its canvas upper has no structure to it, and the sole is too narrow in the heel.

This is a recipe for spilling your foot over the sole or even rolling the ankle!

The Converse Chuck 70 High comes across as a very stiff and unforgiving kick.

But as our manual test showed, it is actually more pliable than the average sneaker! On a 1-5 scale, where 1 is the most flexible, we rated its torsional rigidity as 2.

This is another reason why it bends well with the foot but doesn't offer much lateral stabilty.

There is basically no heel counter in the Converse Chuck 70.

Giving it a push and squeeze in our manual test, we found that there is pure canvas and nothing else.

There is pretty much no heel hold or ankle support in this Converse shoe but you do get the benefit of an adaptive fit. It is a high-top sneaker that conformably moves with your feet letting you be the one in charge.

The Chuck 70 High doesn't come with a pull tab but it's pretty easy to slide into anyways.

The laces, on the other hand, take some time to fiddle with.

The shoe's platform gets even narrower in the heel.

Here, our calliper showed only 73.6 mm in the widest part. That's a whole 10 mm narrower than in the average sneaker.

Such a slim profile can make people with flat feet and overpronation feel less than surefooted in the Converse Chuck 70 High.

Converse One Star.

As our force gauge shows, it takes only 13.9N (Newtons) to bend the Chuck 70 to a 90-degree angle. That's 63% less than it takes an average sneaker! Also, note that our tested pair is not even fully broken in.

This Converse sneaker has the same flexibility as the Adidas Samba and Gazelle.

One of the common complaints about Converse kicks is that, eventually, the rubbery overlay starts to detach from the upper at the pinky toe, where the shoe bends most of the time.

We found that the newer (and improved) Chuck 70 version of the sneaker takes that issue into account. The sealing looks much more solid than in the cheaper Chuck Taylor All Star. 

The shoe's signature diamond outsole hasn't changed much from the OG silhouette....just because it works!

Remember that it was a basketball shoe in the very beginning. What's more, it was the official shoe of the Olympics from 1936 to 1968, and was even chosen as the athletic training shoe by the U.S. armed forces during World War II.

Anyway... That was an extravagant way of telling you that we never had issues with the Chuck's grip on wet floors.

On its official website, Converse recommends ordering a half-size smaller for the Chuck 70 High model.

We can back it up with our own experience and measurements.

Measuring the internal length of the Chuck 70, we got 280.1 mm in a men's US size 9. For some folks, that could even mean the need to go a full size smaller than their regular athletic shoe size!

The Chuck 70 High is a very close-fitting sneaker. In addition, the tall rubber sidewalls around the toebox make it feel even more cramped, especially in the beginning.

Measuring this Converse shoe in the widest part of the toebox, we got 100.1 mm. Even though it is the same as the average, it doesn't change the fact that the shoe's toebox is extremely tapered.

Measuring the shoe's toebox width where the big toe ends, our calliper returned 66.5 mm. That is about 10 mm narrower than the average! It is a very aggressive tapering.

Unfortunately, the Chuck 70 is not offered in wide widths, unlike the original Chuck Taylor All-Star model.

The shoe's tongue is not attached to the sides of the upper. It can shift sideways a little but not critically.

Converse kicks have some of the thinnest tongues in the industry. Measuring one on the Chuck 70 High, we got as little as 1.3 mm.

It's just a small piece of canvas that lies in between the metal eyelets and the wearer's skin.

The Chuck 70 High doesn't come with a pull tab but it's pretty easy to slide into anyways.

The laces, on the other hand, take some time to fiddle with.

The insole of this Converse shoe is easily removable. But we wouldn't recommend replacing it for two reasons:

• it is very thick (13.9 mm) and basically works as the shoe's primary cushioning
• it follows the narrow and tapered shape of the shoe (not every insole can be adjusted to this Converse kick)

The base model of the Converse Chuck 70 High doesn't have any reflective elements.

Believe it or not but the Converse Chuck Taylor silhouette is over 100 years old! Buying this shoe is almost like touching history.

The sneaker got its name from a Converse salesman (Charles Taylor) who was also a semi-professional basketball player and coach. Back in 1922, he suggested several improvements that helped to make the shoe more flexible and supportive and consequently, more popular among basketball players at the time.

That's when the Converse Chucks also received its signature All-Star circular patch on the ankle.

As a basketball shoe, the Chuck Taylor All-Star took up about 70-80% of the market by the '60s. After declining in popularity, it was reintroduced as a retro lifestyle sneaker in the '80s.

This Converse silhouette is now considered an icon among musicians, artists, subcultures, celebrities, and ordinary people alike.

In this lab review, we tested the updated version of the sneaker called the Converse Chuck 70.

Released in 2013, it comes with a slightly higher price tag (+£30) but offers several welcome updates to the silhouette:

• thicker canvas upper
• higher rubber midsole and foxing
• converse chuck taylor all star pro sean pablo flames
• Converse Chuck Taylor OX Mediterranean
• extra material behind the toe cap for reinforcement
• one-piece rubber bottom sole (versus the three-piece sole)
• stitched-on circular logo (as opposed to the printed one)
• modernised black heel patch (versus the old-fashioned white one)
• glossier sole (as opposed to the matte one)