Skechers Max Cushioning Arch Fit review

We highly recommend the Skechers Max Cushioning Arch Fit if you are after the following:

• A shoe that stays comfortable all-day
• A stability shoe to support your flat feet
• A sporty-looking walking shoe 
• A heavily cushioned shoe that would boost your height

If you don't have flat feet and don't experience excessive inward rolling of your ankles, then you may not need as much arch support. Instead, you may prefer a shoe that will not burden your feet with its weight, like the Skechers Go Walk 5 55500-NVY.

And if you want a super flexible pair, the Skechers Summits might just be what you're looking for!

We decided to wear this shoe on a warm summer day... and boy were we right! So when the Skechers Max Cushioning Arch Fit got an incredibly high score of 4 out of 5 on our breathability test, we weren't even that surprised.

What we did was pump smoke through the upper of the shoe to check how much of it came through the material. And this mesh-covered pair did amazing!

For reference, let's have a look at the Skechers Go Walk 5 55500-NVY (on the right), which scored a 2/5 on this same test. We can see how big the difference is!

Skechers Max Cushioning Arch Fit (on the left) vs. Skechers Go Walk 5 55500-NVY (on the right)

Its mesh material is the one to thank for this!

Looking at the upper through our microscope, we could see the woven fabric is thin and has small gaps which definitely help the air come in and out.

These gaps also light up when we put the shoe's upper against the light in our transparency test below.

Following the previous results in our breathability test, we did not think the Skechers Max Cushioning Arch Fit would be the toughest soldier out there, but... we were totally wrong!

After 4 seconds of drilling its toebox with a Dremel, the tool only damaged the top layer of the upper. We gave it a 3 out of 5, and for a pair with such a level of breathability, this is a really good score!

If we compare this shoe's durability with the On Cloudrift's, we can easily see that the Dremel damaged the second pair way more. So we gave it a 1 out of 5 in this same test.

Which is crazy, by the way! The Max Cushioning Arch Fit is not only more durable, but also cheaper: the On Cloudrift costs $35 more!

Skechers Max Cushioning Arch Fit (3/5) vs. On Cloudrift (1/5)

But check this out... the heel pad did even better! We used our Dremel to test out its durability level, and this pair showed way less damage than usual.

Even though it's a pretty sensitive spot for walking shoes, the Skechers Max Cushioning Arch Fit stood up for the test wonderfully, earning a well-deserved 4/5!

If we look at the bottom of the shoe, we can see that it doesn't have a full-length rubber outsole. Usually, this would make you go: "Ah, it must not be that durable then". Rightly, with this jack-in-the-box pair, you might as well think again!

The high-abrasion areas are covered and protected, and let us tell you... its sole is so damn hard for a walking shoe!

After measuring its hardness with a durometer, we could finally put our feelings into numbers, as it scored 80.6 HC. This means it is 11 % harder than average!

But we're not done here. Many Skechers models don't even have rubber soles in the first place, only exposed foam! So the Skechers Max Cushioning Arch Fit's sole is wonderfully tougher.

Harder rubbers and better longevity go hand in hand, which is fantastic, but this also implies that the shoe will be heavier.

And, apparently, its hardness was enough for the shoe to resist our Dremel's attack! After drilling the material for 22 seconds at a speed of 10K RPM, the damage wasn't even close to what other pairs suffered.

To understand it better, we used a tread gauge to measure the depth of the damage, and it was only 0.2 mm deep! Just by saying that the hiking boots that we've tested got around 1mm of damage should be enough to make clear how impressive this score is!

The Skechers Max Cushioning Arch Fit's insanely durable sole will stand strong even when the cushioning is gone and the upper is torn. It's pretty much invincible!

Using a caliper, we measured the outsole thickness at 2.9, which is the same number as the average for this type of shoes.

As we expected, all this durability comes with a price. Weighing the Skechers Max Cushioning Arch Fit on a scale, we got 11.0 oz (312.0g) in a women's US size 11. It is about 2 oz heavier than average, so forget about walking feeling like you've got no shoes on!

After testing them in and out of our lab, we understood why this shoe has Max Cushioning on its name...

...becafootwear skechers go run consistent 220081 bklm black lime!

Using a caliper to measure its stack height, we got 36.0 mm in the heel! This is 4.7 taller than average, which means that your feet will enjoy a highly cushioned ride. Time to walk on clouds!

Following the heel's lead, the forefoot also has a good amount of cushioning. When we measured the forefoot of this pair, we found its stack height to be 27.4 mm!

This left us in awe, as it's even more cushioning than some walking shoes have in their heels! So there's not a single spot where the Skechers Max Cushioning Arch Fit lack support.

Comparing the difference between the stack heights previously mentioned, we got a heel-to-toe drop of 8.6 mm.

This is 1.7 mm lower than average! But it was still high enough to keep our heels protected from impact when taking a step.

Using our durometer, we measured the shoe's foam at 17.0 HA. That number might not seem like much, but hear us out, this means that it's 50% softer than average! Unbelievable!

Saying that it feels like you're walking on marshmallows is the closer we can get to describing the amount of plush these shoes have! This is all thanks to Skechers' Кроссовки Skechers 28 см.

local_video src="https://cdn.runrepeat.com/storage/gallery/product_content/37629/skechers-max-cushioning-arch-fit-midsole-softness-in-the-forefoot.mp4"]

It was pretty cool to find out that the Skechers Max Cushioning Arch Fit won't become a brick when winter comes!

After keeping the shoe in our freezer for 20 minutes and repeating the measurement, our durometer showed 23.4 HA. This means its foam is, once again, 50 % softer than average! Even when it's "frozen!" Another incredible score for this pair.

When we exposed the Skechers Max Cushioning Arch Fit to a low temperature, its midsole became 37.5% firmer, which is quite close to the average!

This pair comes with a renowned Ortholite insole, which adds an extra layer of padding, boosting the general comfort levels. We measured its thickness at 5.4 mm, which is pretty standard for a walking shoe.

If you see "Arch Fit" written on a Skechers shoe... get ready for tons of arch support!

Even for our neutral feet we felt that it was highly supportive. So, flat-footed pals, this is your lucky day!

Given that it's built around support, the Skechers Max Cushioning Arch Fit is not as flexible as many other walking shoes. In fact, it scored a 4/5 on our twisting test!

For comparison, a popular neutral Skechers shoe like the GoWalk 6 scored only 1/5! Super-duper flexible!

This means that this pair is way more rigid than what's normal in its category. Great news for people who are looking for stability in their new shoes!

Unlike most stability shoes, the back of the Skechers Max Cushioning Arch Fit was pretty pliable.

Rating its stiffness with a 2 out of 5, which is literally just 1 point away from the most flexible measurement, we found that the heel counter is quite comfortable and will definitely be gentle with your ankles.

The amazingly wide landing surface of this pair improves its stability. Measuring the widest part of the sole in the forefoot, we got 116.1 mm, 6% wider than average!

This might not sound like much at the beginning, but what if we told you that there are less than a dozen walking shoes that we can think of that are this wide? Exactly!

We also measured the widest part of the heel, and our caliper showed an impressive reading of 96.9 mm. It's way wider than average, and having a wider area to land is always good to feel surefooted!

We perform our stiffness test with a force gauge. In this case, it took 21.5N to bend this shoe to a 90-degree angle, which means it is 20% stiffer than average.

We weren't really surprised to find this out. As this model is stability-oriented, it compromises some freedom of movement to keep your feet well-supported.

As expected, after being exposed to low temperatures (our freezer) for 20 minutes, this shoe became even stiffer, at 25.9N according to our force gauge.

The good part of this shoe already being pretty stiff is that we didn't really notice the difference that much before and after our cold test when we put it on.

It stiffened up 20.5%, which is not that much if we compare it with the average: 64.7%!

When we wore the Skechers Max Cushioning Arch Fit, we realized that the Goodyear rubber-equipped outsole offered superb traction and durability.

We tested it on a variety of urban surfaces, like concrete, tiles, wooden boardwalks... and it was incredibly grippy!

Warning: We have NOT tested it in wet conditions, so please be cautious!

We measured the widest part of the Skechers Max Cushioning Arch Fit's toebox at 99.2 mm, which is pretty close to the average of our tested walking shoes.

Then, we checked the width of this shoe on the big toe. With its 76.4 mm, it's quite close to the average, so we can't really say it's pointy.

Actually, we can definitely recommend it to people with medium-wide feet, as it's available in Wide and Extra-Wide for those who need more space for their toes. It definitely earns some extra points for that!

As we can see in the picture, there are no gussets on the tongue, and it's not attached to the sides of the upper either.

This might make you think that the tongue is going to be dancing around freely, but not at all! It stayed in place during our whole wear test.

Measuring its thickness, our caliper showed 4.5 mm, which means it's 13% thicker than the average. You don't need to worry about any hotspots there!

Skechers Go Run Elevate Womens Shoes.

It comes with a removable insole, which is great news for anyone who wants to wear their own orthotics!

There are no reflective elements on the Skechers Max Cushioning Arch Fit.