adidas Tubular Gazelle review

There is absolutely no walking by the adidas Tubular Gazelle if you're looking for the following:

• a timeless adidas Tubular Originals shirt adidas Tubular own the run verde escuro preto
• an elegant sneaker made of genuine suede
• an easy-to-style model that comes in 20+ colorways
• an excellent value for money

The Gazelle's tongue can be a headache. If you want to avoid chafing and squeaking, we recommend the adidas Tubular Superstar or the adidas Tubular Campus 00S for their softer and better-padded tongues.

The shoe's suede upper may also feel too stuffy on a warm summer day. If you prefer fresh feet, one of our best summer sneakers is likely to suit you better.

And if you need a pair for extended periods of standing and walking, it is a better idea to get a well-cushioned adidas Tubular shoe instead. Like the uber-comfy Alphabounce+ or the Supernova+.

The vivid color options of the Gazelle scream summer. But its toasty suede upper whispers the opposite.

When we used a smoke-pumping machine to check the shoe's ventilation capacity, we found that it was not such an airy sneaker. The smoke (air) was only able to escape from the gaps on the sides of the tongue.

It means that once this adidas Tubular shoe is thoroughly laced up on foot, it will get even less breathable. Thus, we rated it as only 3 on a 1-5 scale where 5 is the most breathable.

Checking the shoe's upper transparency was also in vain as there are no ventilation holes whatsoever.

According to Adidas, Gazelle comes with a suede upper and synthetic lining.

Equipped with a butane torch, we burned the shoe's upper materials for a few seconds to check their genuineness. Next, we tested the burnt parts with a scratch awl.

In the end, we found that the suede is real whereas the white overlay and the inner lining are indeed fake/synthetic.

A sneaker with real suede in the upper is a wise choice if you want truly long-lasting footwear. Let our Dremel test reassure you of the Gazelle's incredible durability.

Raising the speed to the unforgiving 10K RPM, we held the tool against the shoe's toebox for a whole 12 seconds. And the result was truly stunning.

Seeing just a little dimple on the upper, we were amazed at the wear resistance! On a 1-5 scale, we rated the shoe's toebox durability with the highest score of 5.

The inner lining is usually a pretty delicate part of a shoe's upper. But not in the adidas Tubular Gazelle!

Even though it's just a thin synthetic layer, it managed to stand against the Dremel much better than the average.

After 4 seconds of drilling, the tool only scratched the topmost layer without ruining the shoe's integrity. For that reason, we rated the heel padding durability with a high score of 4 out of 5.

Seeing how strong the Gazelle's upper is, we couldn't wait to see if the outsole lives up to that standard too.

First, we checked how hard the bottom rubber is. With a durometer measurement of 83.9 HC, it is nearly the same as the average. Normally, there is a correlation between the hardness of rubber and its longevity.

Now it was time to apply our trusty Dremel to the outsole rubber as well. The 10K RPM speed is relentless but so is the Gazelle.

After the long 22-second drilling session was over, we saw that the rubber did not give in that easily!

With the help of a tread gauge, we measured the depth of the damage at 1.2 mm. That is right about the average of our lab-tested sneakers.

Despite the fact that the shoe's entire platform is made of rubber, we only considered the thickness of the bottom-most layer (below the vertical pillars). That's because when that one is gone, the whole shoe becomes pretty much unwearable.

Our caliper returned 3.4 mm which is pretty thin for a sneaker. That certainly helps to keep the weight of the shoe down but makes us a little concerned about the long-term outsole durability.

Wearing the adidas Tubular Gazelle for a few hours straight, we never felt like it was dragging us down. In fact, it felt on the lighter side of sneakers.

To back up our experiences, we put the shoe on the scale and found that it weighs 13 oz (369g) in a men's US size 9. For a low-top kick, this weight is right about average. Certainly not among the lightest on the market.

Much like the Samba, the adidas Tubular Gazelle is a very grounded sneaker. But it is a few millimeters taller than its counterpart.

Using a caliper, we measured the shoe's stack height at 23.3 mm in the heel. This is notably lower than the average.

Adding to that the total absence of a cushioned midsole, we get a big no-no for all-day wear. Even though the Gazelle has a comfortable step-in feel, it really lacks underfoot support for long periods of wear.

In the forefoot, this adidas Tubular shoe gets even lower. According to our caliper, the stack height comes in at only 15.0 mm under the toes.

Low enough to feel the small pebbles on the ground. Watch out!

There is not a drastic difference between the shoe's heel and forefoot stack heights. Based on our measurements, it is lower than average at 8.3 mm.

Not having an elevated heel is yet another factor that makes the Gazelle feel so minimal and down-to-earth. Whether or not that's a good thing, depends on the wearer's preference only.

Some underfoot padding is provided by the shoe's insole to buffer the foot from the rubber sole. But our caliper shows that it's pretty minimal too - only 4.3 mm thick.

It is pretty unlikely that stability would be a concern in the adidas Tubular Gazelle. Being such a low-profile shoe with a firm midsole, it made us feel planted on the ground at all times.

Not to mention that the suede upper offers a highly supportive foothold on the sides.

Another OVP factor to the shoe's stability is a fair amount of stiffness in its sole.

When we tried to twist the Gazelle torsionally, we found much more resistance than we felt in the Samba. For that reason, we rated the Gazelle's torsional rigidity as 3 out of 5 whereas the Samba came at only 1.

Having such a low-stacked and stiff sole minimizes the chance of ankle twisting to nearly zero.

There is also a reasonable amount of sturdiness in the shoe's heel counter.

Giving it a good push and squeeze in a manual assessment, we rated the heel counter's stiffness as 3 out of 5, where 5 is the stiffest.

On foot, this translates into a firmer heel hold. But not a restrive one as there is still enough give for the ankle.

The platform width of the adidas Tubular Gazelle is pretty similar to that of the Samba. And it is not a wide one.

Measuring the widest part of the forefoot at 102.2 mm, we found that it is slightly narrower than average. This helps the sneaker feel lighter and more minimal.

The heel of the Gazelle's platform shows 72.0 mm in the widest part. This is even narrower than the Samba (75.4 mm) and, consequently, narrower than the average.

If you are coming from a wider platform, like the New Balance 574 for example (114.3/80.2 mm), it is likely to feel odd at first.

Transitioning from heels to toes feels pretty natural in the adidas Tubular Gazelle. This is thanks to its minimal sole which bends along with the foot in a very natural way.

To give you a more precise idea of how flexible this adidas Tubular shoe is, we used a gauge that measured how much force it takes to bend the Gazelle to a 90-degree angle. Turns out, that it needs only 13.8N which is about 40% less than it takes for an average sneaker.

drake wears adidas Tubular ultra boost.

As you can probably tell by now, the adidas Tubular Gazelle and Samba have a lot in common. But there is one aspect where these shoes differ a lot - it's the traction pattern.

adidas Tubular Gazelle

We believe that the difference is due to the initial purpose of these sneakers. The Gazelle emerged as a training/gym shoe whereas the Samba stems from soccer/football. This may explain why the latter has a much more aggressive lug design and pivot points.

adidas Tubular Samba

But for most casual scenarios, both adidas Tubular shoes work quite well. Unless it's raining. We found that the Gazelle is a bit slippery on wet surfaces but you probably wouldn't want to wear a suede shoe in the rain anyways.

Measuring the widest part of the Gazelle's toebox, our caliper returned 97.5 mm. This is within the average of casual sneakers but is slightly on the narrow side.

We think that people with wider feet probably won't feel as comfortable in this adidas Tubular silhouette.

As for the toebox width around the big toe, we measured it at 75.7 mm. Again, close to the average but not so accommodating for wider feet.

Based on our measurements, the Gazelle's toebox shape and width are nearly identical to the adidas Tubular Samba. If you've worn the latter, it is safe to go with the same size. But compared to the adidas Tubular Superstar, the Gazelle has a more tapered and narrower tip of the forefoot.

The Gazelle's tongue has no gussets on the sides. But we didn't really find them necessary as there was no shifting or bunching.

But, unfortunately, the shoe's tongue can be a real deal-breaker for the Gazelle for other reasons (see the section below).

Measuring the tongue with a caliper, we found that it is pretty thin at only 2.8 mm.

But this wouldn't be so much of a problem if it wasn't for its very rough, almost plastic-like, nature that kept cutting into our ankles mercilessly. Wearing taller socks may not be such a bad idea, at least the first few times.

But to our great regret, this was not the only problem with the shoe's tongue. Another major mood-killer is the squeaky sound. It is produced when the rubbery material on the tongue comes in touch with the synthetic lining inside the shoe.

There are a couple of tricks that can help the situation though:

• adidas Tubular NMD XR1 Textile Utility Black
• sewing a small piece of soft fabric inside the shoe, near the topmost eyelets

No heel tabs here but the collar extends up high making it easier to grab when getting the shoe on.

You can customize the in-shoe experience by swapping the insole. It is not attached to the bottom of the shoe and can be replaced easily.

The adidas Tubular Gazelle has no reflective elements.

In 1966, the adidas Tubular Gazelle was first introduced as a performance training shoe. It was the first shoe from adidas Tubular to have a suede adidas Tubular Bounce midsole provides lightweight cushioning.

We love the classic and adaptable look of the Gazelle. This ageless adidas Tubular silhouette manages to mix sporty vibes with a chic and sophisticated look. As a result, we get a clean and straightforward style that goes well with a variety of our outfit choices, from street style to a semi-formal look.

Because of its extreme popularity, different variations of the adidas Tubular Gazelle sneakers have surfaced throughout time, allowing people to have a lot of choices that would suit their taste when grabbing a pair of these classic sneakers.