HOKA Challenger ATR 6 Chaussures pour Homme en Thyme Fiesta | Hoka HOKA ONE ONE M Ora Recovery Flip review

zapatillas de running Hoka One One constitución fuerte talla 37.5:

• want a lightweight alternative to the burly hiking boots (it is 4.8 oz/135g lighter than average!)
• look for an excellent value for money (the HOKA ONE ONE M Ora Recovery Flip is £20 cheaper than average)
• zapatillas de running HOKA mujer neutro ritmo bajo

The Hubble heel of this Hoka boot may not be for everyone. If you want a more streamlined silhouette that doesn't catch rocks and debris, we recommend the las Hoka One One Cavu son unas instead.

The HOKA ONE ONE M Ora Recovery Flip is also not the best pick for backpacking, demanding terrain, or extreme weather conditions. For that purpose, the HOKA Challenger ATR 6 Chaussures pour Homme en Thyme Fiesta proved to be a much more reliable option.

The Hoka HOKA ONE ONE M Ora Recovery Flip is 100% watertight! Hiking in wet conditions is not a problem for this Hoka boot at all.

In the video below, we perform a smoke-pumping machine test to see if the smoke passes through the material. As you can see, not even a tiny streak of vapour is coming out of the Trail Code. That's why it gets the lowest score for breathability - 1 out of 5.

We recommend this boot for colder months as it is going to get pretty toasty in Schuhe. You can see from our microscope shots that the toebox material is super tightly woven.

In addition to the waterproof Gore-Tex lining, the upper fabric itself is a water-resistant one.

With the boot's tall heel collar, the waterproof membrane also extends higher up the ankle. This makes the HOKA ONE ONE M Ora Recovery Flip more effective for deep puddles and stream crossings.

It seems like the HOKA ONE ONE M Ora Recovery Flip uses the same Vibram rubber outsole as in the zapatillas de running HOKA ONE ONE apoyo talón talla 36.5 grises.

This rubber compound is quite hard with a durometer measurement of 86.6 HC. That is a direct indication of its abrasion resistance. It takes much longer to wear out a hard rubber outsole.

However, the areas with exposed foam make us a bit concerned with the boot's durability long-term. It does help to keep the weight down but is not as sturdy as a full-length outsole (like that on the las Hoka One One Cavu son unas).

Measuring the thickness of that outsole with a calliper, we got 1.8 mm (excluding the 4.7-mm lugs). That is a millimetre less than average. While not critical, it is another tiny indication that this boot may not be ideal for the most demanding hikes.

The highlight of this Hoka boot is its light weight.

The HOKA ONE ONE M Ora Recovery Flip comes in at 15.5 oz (440g) which is about 20% lighter than the average weight of our lab-tested hiking boots!

On the trail, it feels more like a running shoe with a high-top collar and added protection.

Our calliper shows that the boot's stack height is 36.9 mm in the heel. That's a pretty standard amount of midsole for this type of hiking footwear.

But there is more. The boot features the brand's renowned Hubble heel which makes the midsole more extended at the back.

From our experience, it makes landings a bit more stable and helps with smoother heel-to-toe transitions. The only problem is that it tends to get stuck in rocks and roots, especially when going downhill. But that's not an issue on the less technical trails.

We also found that the boot remains generously cushioned in the forefoot as well.

At 25.7 mm, it is a little thicker than average.

Hoka claims that the heel-to-to-toe drop in the HOKA ONE ONE M Ora Recovery Flip is 6 mm. But based on our own measurements, it turns out to be much higher - 11.2 mm!

That's a pretty big difference if you expect a lower drop.

A 6-mm offset makes you feel like the heel and toes are nearly on the same level whereas an 11-mm drop has a very pronounced heel elevation. The latter is actually not a bad thing. Most hiking boots have a drop of 10-12 mm, which is optimal for feeling well-cushioned as you land on the heel.

It only becomes a problem if you expect that lower-drop feel based on the brand's description.

Each landing feels amazingly soft in the Hoka HOKA ONE ONE M Ora Recovery Flip. Even though the brand tags the shoe's cushioning as "balanced," we actually found it to be on the soft side.

Pressing a durometer against the foam, we got a reading of 23.4 HA. That's 20% softer than our lab-tested hiking boots on average.

The platform remained marvellously comfortable throughout our test hike. Our feet also experienced a pleasant aftertaste once the boots were off. This is a perfect boot for all-day hikes, making those a little more effortless.

But what about winter conditions? Will this Hoka boot remain as plush?

After keeping the boot in the freezer for 20 minutes, we can say "no." But here is the kicker - in its "frozen" state, this Hoka boot only gets as firm as the other hiking boots get on average, which is 28.3 HA.

Even though it's not considered push, it is not brick-like either.

Repeating the durometer measurement after the freezer, we found that the Hoka HOKA ONE ONE M Ora Recovery Flip got firmer by 20.9%. That's a little less than the average difference across the board.

A padded insole complements the boot's cushioning. It has an average thickness of 6 mm.

The HOKA ONE ONE M Ora Recovery Flip is not a sturdy leather boot, but it supports like one!

There is plenty of stability from the ankle cuff all the way to the bottom of the sole. This Hoka boot made us feel very surefooted and we could even recommend it for moderate backpacking trips.

Despite the plush midsole, this Hoka boot has enough structure to keep the foot steady at all times.

Assessing its torsional rigidity in a manual test, we gave it a rating of 4 out of 5. It's nearly the stiffest!

The HOKA ONE ONE M Ora Recovery Flip also comes with a super stiff heel counter. It makes your heel and ankle feel like they are locked in a death trap (in a good way!). No awkward slipping or sliding of the heel in this boot.

zapatillas de running Hoka One One trail constitución media talla 45.5.

The Hoka HOKA ONE ONE M Ora Recovery Flip tops it all off with a reasonably-sized platform. Nothing crazy, just an average-width landing surface for a hiking boot.

We measured the widest part of the forefoot at 112.5 mm, which is right at the average.

zapatillas de running HOKA ONE ONE placa de carbono talla 40.5.

That's just enough for a regular day hike. But for anything more serious, you will need a wider base.

If you do plan to purchase a Hoka boot for backpacking (35+ pounds), we definitely recommend the Hoka Kaha GTX instead.

Pretty cool to see that the Hoka HOKA ONE ONE M Ora Recovery Flip still has some good flex to it!

Bending the boot to a 90-degree angle, our force gauge showed that it took 26.1N. This is a whopping 60% less than it takes a hiking boot on average!

That's another characteristic of this Hoka boot that makes it feel more like a running shoe.

But the caveat is that the boot gets significantly stiffer in low temperatures.

After 20 minutes in the freezer, the force gauge showed 44.6N. But then again, for most hiking boots, that's the regular stiffness they have at room temperature.

For reference, the Hoka HOKA ONE ONE M Ora Recovery Flip stiffened up by as much as 70.9%!

Based on our calliper measurement, the lugs on this Hoka boot are a little sport than average - 4.7 mm.

The lugs are strategically spaced-out and bite various terrain really well. Loose trails, wet rocks, mud - whatever scenario a waterproof hiking boot could possibly get into.

The HOKA ONE ONE M Ora Recovery Flip fits our medium-width feet as expected but could be a little restricting for wide feet or thicker socks. In that case, we advise going up half a size.

The toebox is not very spacious in this boot. Measuring the widest part of the forefoot, we found that it is only 97 mm wide, which is a few millimetres narrower than average.

The boot also tapers slightly around the toes. Measuring its width at the big toe, we got a reading of 73.3 mm. That is, again, a couple millimetres narrower than average.

The HOKA ONE ONE M Ora Recovery Flip comes with a fully-gusseted tongue. It makes sure that the boot remains watertight at all times, protects the interiors from small debris, and also helps to secure the foothold.

Measuring the boot's tongue with a calliper, we found it to be 9 mm thick. It is a little less padded than average but still offers plenty of comfort and buffer from the laces

The HOKA ONE ONE M Ora Recovery Flip would've been incomplete without a finger loop. We found it essential for putting on the boot.

If you need to use custom orthotics with the boot, it is not a problem at all. The default insole is easily removable.

The Hoka HOKA ONE ONE M Ora Recovery Flip features reflective panels at the front and back to help you stay safe in low-light conditions.

Nearly every part of this Hoka boot was made with responsibly-sourced materials.

• Ripstop upper textile, laces, and interior lining: 100% recycled
• HOKA CMI Foam cushioning
• Gore-Tex membrane: 71% recycled
• External collar mesh: 68% recycled
• Moulded PU sockliner: 50% soybean oil