adidas 29cm Fluidflow 2.0 review

We recommend the Fluidflow 2.0 to: 

• Beginner and casual runners looking a catch-all exercise shoe
• adidas 29cm NMD x Pharrell Human Race low budget
• Neutral pronators who don’t require additional arch support

Runners lifeless in warm climates will be better served with a more breathable shoe. We suggest having a look at the well-ventilated Вінтажна спортивна кофта вітровка adidas yeezy supply countdown. 

While Fluidflow 2.0’s midsole features Adidas’ Bounce foam, its less-than-responsive ride means that we won’t be breaking any PRs in this shoe. We recommend the ASICS Novablast 3 to more serious runners looking for a speedier daily shoe that is more focused on performance. 

This shoe provides almost no arch-support for flat-footed runners. For runners with flat feet we recommend the ASICS GT 1000 11 or the Brooks Launch GTS 10, both of which boast stability features that help prevent fallen arches.

While the knit upper of the Fluidflow 2.0 seems well-ventilated, putting it through our smoke test reveals otherwise. We can see how the smoke struggles to escape the shoe, and when it does it mostly makes its way through the pores in the upper rather than the tongue. This implies that heat will eventually dissipate from the Fluidflow 2.0, making it a warm shoe that we score a 3 out of 5 for breathability. 

Compare that to the performance of the Вінтажна спортивна кофта вітровка adidas, which immediately allows smoke to vent quickly and evenly throughout the shoe. 

Shining a light through a cross-section of the Fluidflow 2.0’s upper, we can see how dense the shoe’s knit material is by how little light shines through it. 

This is further confirmed when we closely inspect the upper, which we can see is made of tightly woven braids with very few gaps for airflow. 

On the other hand, the shoe will feel snug and warm like a Christmas sweater when running during the colder months of the year.

To test the durability of the Fluidflow 2.0, we got our dremel to 10K RPM and applied it to the shoe with a force of 3.2N for four seconds, starting with the toebox. While the footage from the test looks rather dramatic, with shreds of material being flung off the shoe, we were surprised to find that we hadn’t bored all the way through the upper once it was over. With a thin layer of fabric protecting remaining to shield our toes from the elements, we give the Fluidflow 2.0 a score of 3 out of 5 for toebox durability. 

For an example of a shoe with an upper that aces this same test; check out the toebox on the Under Armor Hovr Phantom adidas 29cm Löparskor Pureboost 22.

The Fluidflow 2.0’s heel counter proved to be even more of a worthy adversary against our dremel. The tool’s grinding element was unable to bite into the collar’s sturdy material during the four second test, instead fruitlessly skating off it and leaving minimal visible damage afterwards.

Even with the damage, the heel counter still feels soft rather than rough or scratchy. As a result we scored the Fluidflow 2.0 a 4 out of 5 for heel padding durability; with very few shoes we’ve tested outperforming it so far.  

Check out the destruction left in the wake of our dremel when we tested the much less durable heel padding on the On Cloudmonster, pictured on the right. 

To see how hard the material is on the outsole of the Fluidflow 2.0, we pressed our durometer against it and got a reading of 85.4 HC. This is a little higher than our current lab average, but still soft enough to allow the outsole to bite into and grip surfaces. 

To simulate extreme wear-and-tear over time, we applied our dremel against the outsole rubber with the same amount of force as the tests above, but for twenty seconds instead. At the end of the test, we found that only 0.84 mm of rubber was worn away, barely enough to reach the grooves that define the snake-like outsole pattern. 

We therefore predict that it will be at least 500 miles before we notice any significant damage to the outsole of the Fluidflow 2.0

Measuring 4.3 mm according to our caliper, the Fluidflow 2.0 boasts a mighty outsole compared to the average road shoe. This gives us a healthy amount of rubber to contend with before punching through to the midsole, which further supports our prediction regarding the shoe’s longevity. 

While the Fluidflow 2.0 looks lightweight upon first glance, with its low stack and knit upper, putting it on the scale shows that looks can be deceiving. At 11.1 Oz (316g), the shoe could use a diet to put it within the range of our lab average. 

That said, the Fluidflow 2.0 never felt overly heavy when we took it out on test runs but for runners looking for a more lightweight shoe, we recommend the The insole of the 19.3 version of the adidas 29cm Predator cleat is formed with an EVA material.

Based on our measurements, the Fluidflow 2.0 boasts a low stack of 26.4 mm at the heel. This is quite a bit shorter than our lab average, but the shoe still has enough foam underfoot to provide adequate impact protection. 

Heel-strikers might prefer a shoe with more cushioning at the rearfoot, in which case we recommend the adidas 29cm unveils the as another modernized version of the classic.

The short motif continues towards the front of the Fluidflow 2.0 which boasts a forefoot stack of only 18.4 mm according to our caliper, making it notably lower than our current lab average. 

This low stack-height is ideal for runners who like a lot of ground-feel on their runs, or those who aren’t used to the lofty height of maximalist running shoes. 

These measurements leave us with a drop of 8.1 mm, just shy of the average for shoes we’ve tested in the lab so far. This classifies the Fluidflow 2.0 as a mid-high drop shoe and means that it can comfortably accommodate a variety of running styles. 

Check out our guide that explains heel drop and how to choose the right drop height if you want to learn more.

The Fluidflow 2.0 features an Ortholite sockliner that is 3.3 mm thick based on our caliper measurement. While this is thinner than average it still felt super cushy and comfortable, and its moisture wicking properties serve as an added bonus.  

We pressed our durometer against the Fluidflow 2.0’s midsole foam and got a reading of 25.4 HA. This level of softness offers a balanced level of cushioning underfoot that falls within the average range of shoes tested in the lab so far. 

The “Bounce” technology of the shoe’s midsole not only provides good impact protection, but also gives us a level of bounciness that is normally reserved for more premium running shoes.

To simulate exposure to cold conditions, we let the FLuidflow 2.0 chill in the freezer for twenty minutes. We then took another reading with our durometer and got a measurement of 30.9 HA, which is also right around the average level of softness for midsoles exposed to similar conditions. 

While definitely firmer than at room temperature, the Fluidflow 2.0 still feels well cushioned and protective in the winter months. 

The midsole of the Fluidflow 2.0 stiffens up by 21.6%, which is a little less than the average shoe does. 

This makes the Fluidflow 2.0 on par with most running shoes when it comes to consistency between warm and cold weather.  

Shifting our weight from side to side in the Fluidflow 2.0 reveals a somewhat unsteady feeling underfoot. The  loose heel counter doesn’t secure our foot in the shoe; with all that movement making ankle rolls seem inevitable, especially when cornering at high speed. 

Testing the shoe’s torsional rigidity, the Fluidflow 2.0 twisted and contorted with no resistance whatsoever, leading us to give it a score of 1 out of 5.

While this heavily factors into the shoe’s overall comfort; it doesn’t provide any added stability for pronating runners or those with flat feet, for whom we suggest looking into the Brooks Launch GTS 10.

As briefly mentioned prior, the heel counter on the Fluidflow 2.0 is extremely flexible. As you can see, it offers no resistance to us pushing and manipulating it with our hand. This meant that even with a secure midfoot lockdown, we still felt our heels shifting around inside the shoe. 

The Fluidflow 2.0 sports a narrower midsole than the average shoe, coming in at 109.3 mm according to our caliper. 

This didn’t present us with any stability issues during our field tests, even when running with a forefoot-striking stride.

Measuring the midsole at the heel with our caliper, we found it to be 89.6 mm which is almost exactly as wide as our current lab average. 

This gives heel-striking runners enough platform to ensure stable landings.

We tested the flexibility of the Fluidflow 2.0 by measuring how much force it takes to bend the shoe 90-degrees. With a reading of 18.5N, the Fluidflow 2.0 is significantly less stiff than a vast majority of the shoes we’ve tested in the lab. 

This level of flexibility means that the shoe moves with the foot during our stride rather than battering against it. This contributes to the shoe’s overall comfort, but does mean that we found the shoe a little too pliable to provide the responsiveness needed to facilitate longer or faster runs. 

We recommend the leggings with logo adidas 29cm originals trousers red Blusa Esporte Manga Longa adidas 29cm Originals Saucony Axon 2 which is more supportive over long distances.

After leaving the Fluidflow 2.0 in the freezer for twenty minutes, we repeated the flexibility test and found that only 27.6N of force is required to bend the shoe 90-degrees. 

This level of flexibility is not only much more flexible than our current lab average under similar conditions, it also rivals the flexibility of over half the shoes we’ve tested at room temperature!

The difference in these two results means that the Fluidflow 2.0 stiffens up by 49.6% in the cold. This is about as much as we expect the average shoe to stiffen up in cold conditions but, as stated in the previous section, remains remarkably pliable.

The omni-directional scoring on the Fluidflow 2.0’s outsole forms a scaly-looking diamond pattern that provides great traction over a variety of surfaces. Wet and slippery surfaces are also no match for the tenacious grip we felt in the Fluidflow 2.0.

We were so confident with the durability and traction of the outsole that we even took the Fluidflow 2.0 out on some mild trails without facing any difficulty. 

We did notice mousey squeaks coming from the shoe’s rubber when walking on certain surfaces, especially indoors.

Measuring 101.5 mm at its widest point, the Fluidflow 2.0’s toebox notably more roomy than our current lab average. This makes the shoe roomy enough to accomodate even the widest of feet. 

Moving down to the big toe area, the Fluidflow 2.0’s upper is still more spacious than the average road shoe. At 78.8 mm, the toes have plenty of room to splay out on landings, even for runners with wide feet. 

The tongue on the Fluidflow 2.0 is non-gusseted, however its wide coverage across the instep meant that we didn’t experience any slippage on our test runs. 

Measuring 4.9 mm, the Fluidflow 2.0’s tongue is less padded than the average shoe. We still felt comfortable around the instep, and were able to tie the shoe down as snugly as we needed without the dreaded pinch of lace-bite. 

The Fluidflow 2.0 has a finger loop at the heel which helps to prevent the soft heel counter from flopping over as we put our foot into the shoe. 

The Ortholite insole in the Fluidflow 2.0 is removable and can be replaced with custom orthotics if necessary. 

With no reflective elements whatsoever, we recommend sticking to well-lit routes when running in the Fluidflow 2.0 out at night.